Table of Contents
Advertisement
1 About this document
Target group
Installation personnel
Commissioning personnel
Operating personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
The information provided in this technical manual is a summary of the key
procedures and functions required to assemble, install, commission, and service
the FC721 fire control panel system.
The aim of this technical manual is to provide experienced and qualified personnel
with a quick guide to the necessary processes.
Scope
This technical manual is a supplement to the documents provided for the Cerberus
PRO fire detection system FS720 and applies for the following products:
●
Fire control panels FC721
The information contained in this document is valid for introduction package IP6.
Target groups
The information in this document is intended for the following target groups:
Activity
●
Assembles and installs the
product components at the place
of installation.
●
Carries out a function check
following installation.
●
Configure the product at the
place of installation according to
customer-specific requirements.
●
Check the product operability
and release the product for use
by the operator.
●
Searches for and corrects
malfunctions.
●
Carries out procedures to
correctly operate the product.
●
Carries out all maintenance
work.
●
Checks that the products are in
perfect working order.
●
Searches for and corrects
malfunctions.
Source language and reference document
●
The source/original language of this document is German (de).
●
The reference version of this document is the international version in English.
The international version is not localized.
About this document
Applicable documents
Qualification
●
Has received specialist training in the
area of building installation technology
or electrical installations.
●
Has obtained suitable specialist training
for the function and for the products.
●
Has attended the training courses for
commissioning personnel.
●
No particular basic training is needed.
●
Has been instructed by the
commissioning personnel.
●
Has obtained suitable specialist training
for the function and for the products.
1
7 | 118
A6V10211100_f_en_--
2015-12-15
Advertisement
Table of Contents
