10.3 Displaying C-NET devices
'C-NET line card (onboard/FCL2001)'
Select 'Line 1', continue with 'More Options' <softkey 3>
Select 'Execute commands', continue with <ok>
Read in installed devices
Detector line OFF
Set customer text
Accept replaced devices
Select 'Auto-configure line', continue with <ok>
The line is auto-configured.
After auto-configuration, the individual C-NET detector lines and the associated C-
NET devices of each line can be displayed and configured.
Depending on the control panel type (2 or 4 loops) and the control panel design,
the depiction may vary and several lines may be displayed.
You can display the lines and devices as follows. The displays are depicted in the
same way as those in the 'Auto-configuring a line' chapter with the exception of the
'Show details' command.
ϖ At least one line is configured.
1. In the main menu, select the 'Topology' menu item.
The 'Topology' window is open.
2. Select 'Hardware tree'.
The 'Element' window is open.
3. Select 'Station' and press the 'Lower level' <softkey>.
The elements of 'Station' are displayed.
Displaying C-NET devices
89 | 118