About This Document - Siemens FC121-ZA Technical Manual

1
Target group
Installation personnel
Commissioning personnel
Maintenance personnel
Smart Infrastructure

About this document

Goal and purpose
The information provided in this manual is a summary of the key procedures and
functions required to assemble, install, operate, commission and repair the system.
It is intended to provide experienced and qualified personnel a guide on the required
processes.
Scope
The technical manual applies to the Cerberus FIT fire control panel FC12x series.
Target groups
The information in this document is intended for the following target groups:
Activity
Assembles and installs the product
components at the place of installation.
Carries out a performance check
following installation.
Configures the product at the place of
installation according to customer-
specific requirements.
Checks the product operability and
releases the product for use by the
operator.
Searches for and corrects malfunctions.
Carries out all maintenance work.
Checks that the products are in perfect
working order.
Searches for and corrects malfunctions.
Document identification
Position
Title page
Footers
Last page
Qualification
Has received specialist training in the
area of building installation technology or
electrical installations.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
commissioning personnel.
Has obtained suitable specialist training
for the function and for the products.
Information
Product picture
Product type
Product designation
Document type
Pages
Document ID
Edition date
Document ID
Edition date
Manual
Register
7
A6V10393190_h_en_--
2019-09-01