Structure and function
7
Software
7.4 Software
FXS7212 Cerberus
Engineering Tool
FX7220 Cerberus Remote
Quantities Tool
70 | 118
Building Technologies
Fire Safety
The following software is available for planning, configuration and commissioning:
For programming the object- and customer-specific control panel functions.
Indicates a graphic representation of a station's PMI, provided that the PC is
connected to the station.
Cerberus-Remote is software for the PC which can be used to display the Person
Machine Interface of a 'Station' on the PC, if the corresponding approval is
granted. Depending on the operation mode, Cerberus-Remote can either be used
for display purposes or for display and operation purposes.
The outline quantities tool can be used to calculate C-NET utilization (AK, RK, MK
connection factors) and determine the C-NET line card load.
This results in e.g.:
●
Number and type of devices per detector line
●
Number of required line cards
●
Number of C-NET loops and stubs
●
Battery capacity required (emergency power supply)
Detailed information on configuration of the fire detection installation and working
with the software tools can be found in the reference documents stated.
A6V10211100_f_en_--
2015-12-15