1 About this document
Target group
Installation personnel
Commissioning personnel ●
Operating personnel
Maintenance personnel
Building Technologies
Fire safety
●
Specialist electrical engineering knowledge is required for installation.
●
Only an expert is permitted to carry out installation work.
Incorrect installation can take safety devices out of operation unbeknown to a
layperson.
Goal and purpose
The information provided in this manual is a summary of the key procedures and
functions required to assemble, install, operate, commission and maintain the
system.
It is intended to provide experienced and qualified personnel a guide on the
required processes.
Scope
The technical manual applies to the Cerberus FIT fire control panel FC361-xx
series.
Target groups
The information in this document is intended for the following target groups:
Activity
●
Assembles and installs the product
components at the place of
installation.
●
Carries out a performance check
following installation.
Configure the product at the place of
installation according to customer-
specific requirements.
●
Check the product operability and
release the product for use by the
operator.
●
Searches for and corrects
malfunctions.
●
Carries out procedures to correctly
operate the product.
●
Carries out all maintenance work.
●
Checks that the products are in
perfect working order.
●
Searches for and corrects
malfunctions.
About this document
Applicable documents
Qualification
●
Has received specialist training in
the area of building installation
technology or electrical installations.
●
Has obtained suitable specialist
training for the function and for the
products.
●
Has attended the training courses
for commissioning personnel.
●
No particular basic training is
needed.
●
Has been instructed by the
commissioning personnel.
●
Has obtained suitable specialist
training for the function and for the
products.
A6V10421795_en--_g
1
7 | 124
2016-11-18