Table of Contents
Advertisement
5.5.6 19" mounting kit
Building Technologies
Fire Safety
The 19" mounting kit FHA2016-A1 serves as a retainer for installing a station into a
19" rack or into a 19" cabinet. To fix a station, the two retainers enclosed with the
kit must be mounted.
The mounting instructions described below apply to all housing types.
2
1
Figure 16: Installing the 19" mounting kit, taking the example of the Standard housing
1 Fixing screws for the station (3x or 5x), M5 x 10 pan head screws
2 Rear panel of the station
3 Fixing of the crossbars on the 19" housing or rack (2 screws each) with M5 x
10 pan head screws
4 19" housing or rack
5 19" cross bars (4x per kit)
6 19" housing brackets (2x per kit)
7 Hexagonal fixing screws M6 x 12 for housing brackets (2x per side) and
washers M6
8 Top 19" retainer
9 Bottom 19" retainer
1. Screw the 19" crossbars to the housing bracket. Consider the installation depth
of the station.
2. Secure 19" retainers to 19" rack or in 19" cabinet. Consider the mounting
height of the station.
3. Fix the station on the housing brackets.
4
3
Mounting
Options
5
6
41 | 118
A6V10211100_f_en_--
2015-12-15
5
8
9
Advertisement
Table of Contents
