Download  Print this page

Revision History - Siemens Cerberus PRO FC721 Technical Manual

Fire control panel.
Hide thumbs

Advertisement

About this document
1

Revision history

1.4 Revision history
Version
Edition date
f
2015-12-15
e
2014-02-10
d
2013-11-14
c
2012-06
10 | 118
Building Technologies
Fire Safety
The reference document's modification index applies to all languages into which
the reference document is translated.
The first edition of a language version or a country variant may, for example, have
the modification index 'd' instead of 'a' if the reference document already has this
modification index.
The table below shows this document's revision history:
Brief description
Edition: Introduction Package IP6
New:
Freezing outputs
Enabling frozen outputs
Switching off, Safety during switch-off, Switching on
Glossary entries in the text marked with '↑'
Cyber security disclaimer
Revised:
Referenced documents updated
Connectable C-NET devices updated
LED indicator (internal) FTO2002 replaced by LED module FTO2008, and red
and yellow LED replaced by red/green and yellow LED
Loading data to the 'Station'
Loading configuration from the PC to the 'Station'
Loading configuration from the 'Station' to the PC
Creating a backup of the 'Site' configuration
Information regarding freezing outputs added to chapters 'Loading configuration
from the PC to the 'Station'' and 'Restarting the detector line'
Initializing 'Station'
Switching off the detector line, Switching off a zone
Information on PIN configuration in Engineering Tool added to the 'PIN
administration' chapter
C-NET detector line updated
Information on voltage ranges revised in the chapter 'Configurable inputs/outputs'
Edition: Introduction Package IP5
Change to date format according to ISO 8601
C-NET devices added: FDCI723, FDM223-Ex, OOH740-A9-Ex, FDCL221-Ex,
FDA221, FDA241, FDM273
License key (S1) replaces license key (L1)
CPR replaces CPD: The Construction Products Regulation (CPR 305/2011)
replaces the previous Construction Products Directive (CPD 89/106).
Edition: Introduction Package IP4
C-NET devices updated
Revised:
General commissioning steps
New chapter:
Chap. 'Connectivity and communication with 'Station'
A6V10211100_f_en_--
2015-12-15

Advertisement

   Related Manuals for Siemens Cerberus PRO FC721

   Related Content for Siemens Cerberus PRO FC721

Comments to this Manuals

Symbols: 0
Latest comments: