Table of Contents
Advertisement
Mounting
5
Options
5.5.3 Install shield connection terminal blocks
38 | 118
Building Technologies
Fire Safety
Figure 12: Mounting of the shield connection terminal blocks
1
Shield connection terminal block
2
Camp bar
Mounting steps
1. Secure the clamp bar (2) above the rectangular cable breakout opening on the
right with two screws (3)
2. Hang the shield connection terminal blocks (1) onto the clamp bar (2) and
fasten by tightening the knurled screws.
2
1
3
Philips screws M 3/6
A6V10211100_f_en_--
2015-12-15
Advertisement
Table of Contents
