This Is How You Configure The Simatic Thin Client Touch Panel - Siemens SINUMERIK 840D sl OP 010 Manual

Operating the Touch Panel
To operate the Touch Panel, use the integrated keyboard:
Figure 1-24
The integrated keyboard is activated using the button to the far right on the start bar.
See also
How to register a TCU on the system network (Page 54)
Using the TCU's main menu (Page 42)
Reference
SIMATIC HMI, Operating instructions: Thin Client, Thin Client PRO
1.4.2.6

This is how you configure the SIMATIC Thin Client Touch Panel

Operating the start bar
The following functions are available in the start bar of the SIMATIC Thin Client:
To select the SINUMERIK mode, press the button:
Operator panel front: OP 010
Manual, 07/2018, A5E36371538B
Virtual Keyboard
General information and networking
1.4 Networking
61