TOTAL HOME SURGE PROTECTION Coax All Appliances Phone Purge damaging surges at the source and protect home electronics with Siemens SPD Home Entertainment Home Security Systems Cable TV / Satellite Kitchen & Laundry Appliances Computer Systems Phone Lines & more For more information on products and warranties contact your local distributor or visit: www.purgethesurge.ca...
Trim shall have two separate supports designed to engage the box flange to stabilize and secure the trim during installation. Trim screws are located behind the lockable door for tamper resistance. Interior – Type P1: Interiors may be...
Bolted Current-Carrying Parts feed breakers without changing box size. Split Neutral Connection Accessible From Front The complete family of panelboards from Siemens Screw-Type Mechanical Lugs employs numerous features – all industry-leading, many exclusive. Note the following, all found in the innovative...
“Series Rated” must be identified at the time of order entry. the addition of an appropriate field-installable kit. Lighting and Distribution Panels – Type P1 versa, while maintaining readability of deadfront labeling. and three-pole breakers with an equivalent number of one-pole breakers.
(HFD6) HF , (JD6) J6, (JXD6) JX, (HJD6) HJ, (CJD6) CJ, (SJD6) SJ, (LXD6) LX, (LD6) L6, (HLD6) HL, (MD6) M6, (HMD6) HM, (CMD6) CM, (SMD6) SM, (ND6) N6, (HND6) HN, (CND6) CN, (SND6) SN * Other voltages available. Please contact your local Siemens representative.
Distributor Stock Panelboards Type P1 Panelboards Interior Interiors Only – Fronts Boxes Less Branch Breakers Interiors Max No. Height Type 1 Type 3R/12 Surface Flush Rating Convertible Main of Poles (in.) Mains Mains Front Interior...
BL Lineside Screws - 1 Bag of 200 Copper Neutral Lug Kits – 250A No. of Catalog Description Circuits No. of Catalog Description Circuits No. of Catalog Description Circuits CNLK42 Miscellaneous Replacement Parts Catalog Description Bonding Kit (250A Max.) 2NLK42 MHKP1 Truck Kit for P1...
– Main or Subfeed (Breaker not included) Sub- Catalog Main Breaker Frames Service Rating feed 1 Phase MBKBL1 1 Phase MBKBC1 MBKQJ3 (Breaker not included) MBKFD3 (Breaker not included) Miscellaneous Accessories Catalog Description NBK03 NBK03-UL Both number strips are supplied in P1...
Distributor Stock Panelboards Main Breaker Selection (Breaker Kit) Catalogue Ratings Ratings Ratings Description 240V 480V 600V MBKBL12100 Kit with 2-Pole BL 100A Breaker 10KA – – Other Breaker kits available. Please contact your local Siemens representative. MBKFD33250 (Breaker included)
Width Suitable for Cu or Al Rating Steel A unique feature of the P1 panels is that they can accommodate either feed-thru lugs or one sub-feed circuit breaker (up to 250A) without any addition in box height. For our example changing the branch...
Factory Assembled Panelboards Selection and Application Main Lugs Only Catalog No. Max Panel Max 1-Pole Amp Rating Circuits 208Y/120V 3Ø4W 120/240V 1Ø3W 480Y/277V 3Ø4W 600Y/347V 3Ø4W (in.) Aluminum Bus, Top Fed and Surface Mounted Main Circuit Breaker Aluminum Bus, Top Fed and Surface Mounted...
Factory Assembled Panelboards SELECTION Selection and Application - Type P1 Main Breaker Selection Max. Interrupting Catalog Breaker Available Rating (kA) Rating Type Trip Values 240V 480Y/277V 600Y/347V – – 30, 40, 50, 60, 70, 80, 90, 100 – – 30, 40, 50, 60, 70, 80, 90, 100 –...
250 amps. Please consult CSA, CEC, and local inspection authorities for specification and installation guidelines. No increase in box height. Space is already built into P1 panel. Modifications When required, special constructions or additions to standard panelboards may be specified for factory-assembled panelboards.
6. Service Entrance Label FD6, FXD6, HFD6, JXD6, JD6, HJD6, HHJD6 Type P1 Panelboards are factory labeled suitable for use as service entrance equipment. For regulations governing this feature, please consult CEC, CSA, or space for shunt trip. All others may be used on mains or sub-feeds local electrical authorities.
P2 Panelboards Flexibility is the hallmark of the P2 panel. This panel offers a Main Lug / Main Breaker wide array of factory-assembled options to meet almost all Enclosure – Standard Type 1 enclosure is 20" wide x 5.75" lighting panel applications. With this design, the ability to mix deep X.
Box depth = 5.75 in. (146 mm) Box depth = 5.75 in. (146 mm) Box width – 20 in. (508 mm) Box width – 20 in. (508 mm) Panel Width for 100-600A for 100-600A 20 in. (508 mm) *Contact local Siemens representative before ordering.
3” or (6) pole increments. Table P2-9 – Branch Neutral Connections Wire Range Max. Number of Connections Max. Amps #14-#6 #14-1/0 #6 - 350 Kcmil (1) #4-600 Kcmil or (2) #6-250 Kcmil Based on 75 degree copper. *Contact local Siemens representative before ordering.
(1) Refer to Pg 12, table P2-21 for breaker kits and accessories--(2) Part # for Interior only--(3) Refer to Pg 4 for Main breaker selection (4) Refer to Pg 5 for Branch circuit breaker selection (5) Refer to Pg 12, table P2-20 for box and trim details--(6) For more number of circuits, contact local Siemens representative before ordering...
• Asco 920 through 225 amps. Adds 12” unit space as main, 15” unit space as submain. • Remote control switches – mounted in a 23” enclosure • Siemens LEN through 30 amps. Adds 12” unit space. to be cable connected to the panel. Makes box 10" deep.
(Horizontal Mtg.) (2) FD Subfeed (Vertical Mtg.) TVSS Split bus is paired with feed-thru lugs by default. Feed-thru lugs are to feed the section after the split. NOTE: N/A = OPTION NOT AVAILABLE *Contact local Siemens representative before any modification.
Box Height Addition (1) 250 - 750 Kcmil or (2)#3/0 AWG - 250 Kcmil Cu or Al JD6, JXD6, HJD6, Main Breaker CJD6, SJD6, SHJD6, (1)#4/0 AWG - 750 Kcmil Cu or Al SCJD6 *Contact local Siemens representative for any modifications.
7.7 Dp. Box min. 100 A ≤ 200 adds 12” to unit space and 10” DP. min. Table P2-19 – Remote Control Switch Modification* Description Auxiliary Contacts (Mounted Not Wired) Ea. 2-Wire Control *Contact local Siemens representative for any modifications.
Dimensions Type 1 Box Box is symmetrical Type 3R/12 Box Dimensions are interior of the box. Add 5/8” to width for absolute dimension. Add 1/8” to height for absolute dimension. Dimensions shown in inches and millimeters [ ].
Trim screws, clips, directory cards, ground bars, interior adjusting kit, bounding kit, number strip BBKCED32 CED6 branch breaker kit Connector kit for P2, 24”W, 400A Cu/Tin bus only BBKCED32CS CED6 branch breaker kit Connector kit for P2, 24”W, 400A Cu/Silver bus only (1) For CED6 branch breaker kit, contact local Siemens representative...
Siemens Canada Limited Customer Interaction Centre Industry Automation & Drive Technologies Tel: (888) 303-3353 1550 Appleby Line Burlington, Ontario Or email your questions to: L7L 6X7 Canada firstname.lastname@example.org www.siemens.ca Order Number: 1.0_07_A&D-1385...