Mounting
5
Mounting and assembling a station
5 Mounting
5.1 Mounting and assembling a station
22 | 118
Building Technologies
Fire Safety
Before mounting and installation, check all the fire detection installation
components visually for damage caused by improper transport.
Figure 3: Unpacking and checking
●
Components with clear signs of damage must not be used in the station or
operated as fire detection installation components.
●
National and local standards and requirements must be observed when
assembling the station and its components.
●
The following mounting instructions refer to the specifications of the EN 54
standard and the manufacturer's recommendations.
●
The site chosen to assemble the station and associated components must
match the planning documents for the fire detection installation.
Cerberus
TM
C
A6V10211100_f_en_--
2015-12-15