1 About this document
Goal and purpose
These brief instructions aim to provide experienced and qualified installation and
operating staff with a guide on how to mount, install, commission and repair the
These brief instructions are supplements to the documents provided for the
Cerberus PRO FS720 fire detection system and apply for the following products:
Fire control panel FC722, FC724
FT724 fire terminal
These brief instructions only apply to use with C-NET detector line cable and when
commissioning with auto-configuration. They do not include other applications
and/or components of extended networking.
The information contained in this document is valid for introduction package IP6.
The information in this document is intended for the following target groups:
Assembles and installs the
product components at the place
Carries out a function check
Carries out procedures to
correctly operate the product.
Source language and reference document
The source/original language of this document is German (de).
The reference version of this document is the international version in English.
The international version is not localized.
The document ID is structured as follows:
-- = multilingual or international
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
About this document
Has received specialist training in the
area of building installation technology
or electrical installations.
No particular basic training is needed.
Has been instructed by the
5 | 62