Viewing Wireless Services; Configuring An 802.1X Wireless Service - 3Com WX4400 Reference Manual

Viewing Wireless
Services
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select Wireless Services.
Configuring an
802.1X Wireless
Service
1 Access the 802.1X Service Profile wizard:
2 Read the description of the wizard on the first page, then click Next.
3 Edit the service name in the Name box.
The methods you select for authentication are also used for
authorization. You also can configure accounting for Start-Stop or
Stop-Only messages. The authentication method(s) for accounting can be
but are not required to be the same as the method(s) for authentication
and authorization.
If you plan to specify a RADIUS server group, configure the group first,
before using the wizard. To be available for selection in the wizard, the
RADIUS server group must already be configured before you open the
wizard. (See "Viewing and Configuring RADIUS Settings" on page 311.)
To view wireless services:
The service profiles appear in the Content panel. Each row in the table
shows settings for an individual service profile.
To display all settings for a service profile, select the service profile and
click Properties.
The 802.1X Service Profile wizard requires you to select one or more
RADIUS server groups and does not allow you to complete the
configuration without selecting one. To be available for selection in the
wizard, a RADIUS server group must already be configured before you
open the wizard. (See "Viewing and Configuring RADIUS Settings" on
page 311.)
a In the Organizer panel, click on the plus sign next to the WX switch on
which you want to configure the service profile.
b Click on the plus sign next to Wireless.
c Select Wireless Services.
d In the Task List panel, select 802.1X Service Profile.
Viewing and Configuring Wireless Services 251