4.6
Picomotor Connections
Each 8743-CL axis has its own set of positioner interfacing connectors. In total there are
two(2) feedback interface connectors and two(2) motor output connectors.
4.6.1
Motor Connectors
Each Model 8743-CL controller/driver can control one of two 4-pin RJ-22 single output
ports for use with any single-channel Picomotor actuator at any given time.
RJ-22 motor connector pinouts are as follows:
Pin-1
Pin-2
Pin-3
Pin-4
The model 8725 multi-axis adapter can be used to connect the 4-pin RJ-22 output ports to
New Focus™ Picomotor products with 6-pin RJ-11 connectors.
Motor and Feedback Connectors
Not Connected
Ground
Motor
Ground
37