Adjusting The Gamma - Barco MCM-400 HFR User Manual

7.4.3

Adjusting the gamma

Description
The gamma setting defines the reproduction of the mid tones of a projected image. A correct gamma setting results in a maximum
of gradations (brightness levels) in the projected image.
The gamma can be set in the range 0 to 3.2 (in steps of 0.2). Default value is 2.2. This value should meet the gamma setting of the
source (e.g. graphical card of a computer that is used as a source). In case of doubt, leave the gamma to its default setting.
How to adjust gamma?
1. In the OSD, navigate to Image > Settings > Gamma... and press ENTER to select.
Image 7-34
2. In the dialog box, select the source for which you want to change the gamma.
Image 7-35
3. Change the value to your wishes.
Image 7-36
4. Exit the menu.
R5909056 MCM-400 HFR 11/05/2016
7. Getting started
81