Moving An Anchor Point In Small Steps - Barco MCM-400 HFR User Manual

10.2.9 Moving an anchor point in small steps

Description
Adjust mode is used to do small Soft Edge adjustments using the arrow keys on the RCU. Each step is only one pixel. The actions
that can be performed in Adjust mode are explained in the Help section of the Soft Edge edit dialog.
For larger adjustments the Adjust mode is not ideal. In this case the use of the Edit mode and Change mode is more appropriate.
Using the arrow keys to move an anchor point
1. From the Soft Edge edit dialog, press ENTER or BACK to navigate to Adjust mode.
Image 10-52
2. On the RCU, press ◄ or ► multiple times of keep the arrow pressed to move the selected anchor point in the direction of the
X-axis.
3. Press ▲ or ▼ multiple times or keep the arrow pressed to move the selected anchor point in the direction of the Y-axis.
R5909056 MCM-400 HFR 11/05/2016
10. Expert operation
141