Details On Stitched Layouts - Barco MCM-400 HFR User Manual

7. Getting started
7.3.1

Details on Stitched Layouts

Lock source
To maintain synchronous operation amongst the image halves or quadrants, the frame start (i.e. vertical sync) of each source that
make up the Stitch Layout may deviate no more than 150 lines from the frame start of the Lock source. Moreover, it must be less
than the Sync Variance Limit setting (see concerning topic).
If the deviation of the frame start of each source (in lines) that make up the Stitch layout is known in relation to the frame start of the
Lock source, and if this deviation is within specification of the projector, the Sync Variance Limit must be set to a value that is a bit
higher.
64 R5909056 MCM-400 HFR 11/05/2016