Barco MCM-400 HFR User Manual page 160

10. Expert operation
Image 10-67
Note: The Y value is transformed to a relative L value, which implies that the physical unit is irrelevant.
6. Click Proceed.
A Green test pattern is displayed
7. Proceed in the same way for Green, Blue and White as for Red.
8. The values are finally updated in the Measured values of the Dynacolor set.
9. Click Default desired to copy the Measured values for Red, Green and Blue and White to the Desired values and to calculate
the secondary colors Cyan, Yellow and Magenta.
156 R5909056 MCM-400 HFR 11/05/2016