Barco MCM-400 HFR User Manual page 67

7. Getting started
Image 7-2
Image 7-3
Positioning and scaling of the source signals
If one single source signal is used to be displayed full screen (Stitch Layout = Single), the image is stretched or shrunk to the device's
native resolution.
If multiple source signals are used to make up the full image (Stitch Layout = Dual or Quad) and they all have the same resolution,
they are first stitched, then stretched or shrunk to fit the device's native resolution and aspect ratio.
If multiple source signals are used to make up the full image (Stitch Layout = Dual or Quad) and they have different resolutions
or if one signal is missing, each source signal is centered in its target area in its native resolution. If the source image is too large, it
is cropped. If it is too small, black borders are visible around the image. If a signal is missing, the corresponding half or quadrant is
blanked.
R5909056 MCM-400 HFR 11/05/2016 63