Soft Edge Area Shape - Barco MCM-400 HFR User Manual

10.2.2 Soft Edge area shape

Description
The soft edges are created on the distorted image, i.e. it is available at the borders of the distorted image.
Using the Soft Edge user interface, you can create a Soft Edge area and/or a blanked area on each of the four edges of the image.
Each edge where the blending is to be applied has a grid of anchor points. Depending on the selected level, the amount of anchor
points can vary from 4 to 25. By default the grid is rectangular, symmetric and it covers 12.5% of the width or height of the image.
Image 10-28
Soft Edge anchor points
The anchor points are numbered from 0 to 24 and can be moved to the desired location to determine the size and shape of the Soft
Edge area on the selected edge. By moving anchor points zero to four, a blanked area is created.
R5909056 MCM-400 HFR 11/05/2016
10. Expert operation
127