10. Expert operation
10.1 Geometry
About this section
In this section we explain how the coordinate system can be changed to enable a different way of adjusting the geometry, how the
geometry data can be managed, how the image can be shifted on the projector and how we can manually set the time that can be
used for geometry adjustment processing. This turns out to be very important in multiple channel display systems.
Overview
•
Setting the Axis link to ON or OFF
•
Working with Geometry files
•
Shifting the image on the projector panel
•
Transport delay
110
R5909056 MCM-400 HFR 11/05/2016