Setup And Configuration - Barco MCM-400 HFR User Manual

6. SETUP AND CONFIGURATION
About this chapter
This chapter explains the setup and configuration of the MCM-400 HFR.
Overview
• Setting the RCU address
• Powering the MCM-400 HFR
• Activating the MCM-400 HFR
• Setting the MCM-400 HFR address
• Network configuration
• Checking the display connection
• Linking MCM-400 HFR devices in a multi-channel system
• Linked CLO
Basic setup (example)
The drawing below is a representation of a random basic setup of a Galaxy 4K HFR or HDQ-4K40 series projector using the MCM-
400 HFR external warp box.
Source 1
1
100-240V
50-60Hz
6
LAN
Image 6-1
1 DisplayPort connection with input channel 1.
2 DisplayPort connection with input channel 2.
3 DisplayPort connection for channel A between MCM-400 HFR and Galaxy 4K HFR or HDQ-4K40 series projector.
4 DisplayPort connection for channel B between MCM-400 HFR and Galaxy 4K HFR or HDQ-4K40 series projector.
5 Dedicated stereo emitter cable.
6 Ethernet network connections (UTP cables).
Some sources and the Galaxy 4K HFR or HDQ-4K40 series projector are connected to the MCM-400 HFR.
Please note that the network connection between the MCM-400 HFR and the Galaxy 4K HFR or HDQ-4K40
series projector should be established to enable the MCM-400 HFR output.
R5909056 MCM-400 HFR 11/05/2016
Source 2
2
3 4
6. Setup and configuration
5
DP A DP B
41