Shifting The Image On The Projector Panel - Barco MCM-400 HFR User Manual

10.1.3 Shifting the image on the projector panel

Description
It is possible to shift the whole image on the projector panel. This is considered as an equal movement of the 4 corner points in 2
x 2 mode. The Geometry edit dialog box is used for adjusting the shift. After shifting the image on the projector panel parts of the
image might not be visible anymore.
Shifting the image on the projector panel
1. In the OSD, navigate to Geometry > Edit > Shift... and press ENTER to select.
Image 10-16
Image 10-17
R5909056 MCM-400 HFR 11/05/2016
10. Expert operation
119