Barco MCM-400 HFR User Manual page 58

6. Setup and configuration
Image 6-15
Defining the Slave devices in the Master MCM-400 HFR
1. In the OSD of the Master MCM-400 HFR, navigate to Installation > Linked devices... and press ENTER to select.
Image 6-16
2. In the dialog box that appears, select the Host x checkbox and press ENTER.
Note: x represents the number of the Host.
The IP address edit box is enabled.
3. Fill in the IP address or Hostname of the Slave MCM-400 HFR.
54 R5909056 MCM-400 HFR 11/05/2016