Mcm-400 Hfr Control - Barco MCM-400 HFR User Manual

14.4 MCM-400 HFR control

Buttons on the RCU used to control the MCM-400 HFR
Pause
MENU
On - standby
Source selection
9
SDI
7
DVI
5
VIDEO
3
RGB
1
Image 14-7
RCU: control buttons
• On / Standby button
• Pause: to switch MCM-400 HFR to pause or resume from pause. If Pause is active, the display shows a full black image,
although MCM-400 HFR remains in active state (not standby!).
• Freeze : to freeze/unfreeze the image
• Source selection buttons:
- 1 (RGB)
- 2 (PC)
- 3 (VIDEO)
- 4 (S-VIDEO)
- 5 (DVI)
- 7 (SDI)
These buttons can be used as shortcut keys to display a source full screen or in a window in native resolution. Pressing a
multiple times cycles through the sources connected to the same type of connector:
Example: two DVI sources are connected to the MCM-400 HFR: on to the DVI-D connector on input layer 3, the other to the
DVI-D connector on input layer 4. Pressing 5 on the RCU will launch the DVI source which is connected to the DVI-D connector
of input layer 3. Pressing 5 again, will launch the DVI source which is connected to the DVI-D connector of input layer 4.
Pressing 5 again will launch the DVI source of input layer 3.
R5909056 MCM-400 HFR 11/05/2016
BACK
Freeze
ENTER
PAUSE LOGO PIP
AUTO IMAGE
0 - +
PHASE
8 - +
TINT
6 - +
COLOR
S-VIDEO
4 - +
BRIGHTN
PC
2
- +
CONTR
: to switch MCM-400 HFR to active state or to switch it to standby
14. RCU Control
199