Expert Operation - Barco MCM-400 HFR User Manual

10. EXPERT OPERATION

About this chapter
In this chapter we further discuss the highest level features of the MCM-400 HFR.
In the geometry section we explain how the coordinate system can be changed to enable a different way of adjusting the geometry,
how the geometry data can be managed, how the image can be shifted on the Galaxy 4K HFR or HDQ-4K40 series projector and
how we can manually set the time that can be used for geometry adjustment processing. This turns out to be very important in
multiple channel display systems.
In the soft edge section; electronic blend is explained in detail: in multiple channel display systems, we can make the images of
adjacent channels overlap in part. To correct for the doubled brightness in the overlap areas, electronic soft edge can be used. The
same feature can also be used to blank parts of the image. In the overlap area of multiple channel display systems, we can adjust
black color to make it meet the black of the non overlap areas in your display system.
Using Dynacolor, we can change the color temperature of the image or we can fine tune the image colors to match multiple channels
to each other.
Finally we discuss how we can align a set of gray levels amongst multiple channels in your display system.
Overview
• Geometry
• Soft Edge and Black Level
• Dynacolor
R5909056 MCM-400 HFR 11/05/2016
10. Expert operation
109