Working With Geometry Files - Barco MCM-400 HFR User Manual

10. Expert operation
10.1.2 Working with Geometry files
Description
All geometry related data is stored in Geometry files. The device's memory contains a list of Standard Geometry files created for
demo purposes, e.g. to demonstrate the warping capabilities of the projector.
The moment we start adjusting the geometry, a Custom Geometry file is created in which all adjustments are stored. The active
geometry file can always be adjusted. If it is a Custom Geometry file, the changes will overwrite the original values. If it is a Standard
Geometry file, the content is copied to a Custom Geometry file first and then the data is changed.
It is possible to Upload Custom Geometry files from a computer to the projector or to download Custom Geometry files from the
projector to a computer if this computer is in the same network as the projector.
The file notation in the Geometry files menu describes a file path.
For example : /Standard/Nodist.xml
Name
Standard
Nodist
xml
The Geometry operations that you can perform are as follows.
Overview
• Loading a Geometry file
• Renaming a Geometry file
• Copying a Geometry file
• Deleting a Geometry file
114
Description
file directory, also the type of file: Custom or Standard
file name
extension
R5909056 MCM-400 HFR 11/05/2016