7. Getting started
Image 7-6
The selected source appears in the first button (indicating the top half) of the Selection section and is disabled from the Sources
section.
4. Select a source (or input) to be displayed on the bottom image half.
Image 7-8
The selected source appears in the second button (indicating the bottom half) of the Selection section and is disabled from the
Sources section.
5. Click Next.
6. In the section Lock on source, select the input from which the sync should be used to display the image.
66
Image 7-7
R5909056 MCM-400 HFR 11/05/2016