Full-Screen Synchronous Representation - Barco MCM-400 HFR User Manual

12.8 Full-screen synchronous representation

Description
• Display setup — Stereo mode — Mono / Passive stereo / Active stereo:
The input will be displayed synchronously when its vertical refresh is between 23.50 Hz and 60 Hz. When the vertical refresh
is not within this range, the input will be displayed asynchronously at 60 Hz. This applies only if Full-sceen synchronous rep-
resentation is set to On.
Enabling or disabling full-screen synchronous representation
1. In the OSD, navigate to Display setup > Full-screen synchronous representation...> On or Off.
Image 12-15
2. Press ENTER to select to select your option.
R5909056 MCM-400 HFR 11/05/2016
12. MCM-400 HFR tools
187