Selecting The Geometry Level - Barco MCM-400 HFR User Manual

9. Advanced operation
9.1.5

Selecting the geometry level

Selecting the geometry level
In the OSD, navigate to Geometry > Edit > 2x2 or 3x3 or 5x5 or 9x9 or 15x15 or 33x33 and press ENTER to select.
Image 9-9
In the Geometry edit dialog, the selected Level 2x2 appears.
Image 9-10
Always start adjusting the geometry at the highest level (i.e. 2 x 2) and go down only one level at the time.
Select Mode is enabled and the top/left (row = 0 ; column = 0) corner is selected.
100 R5909056 MCM-400 HFR 11/05/2016