Creating A Window File - Barco MCM-400 HFR User Manual

7.3.2 Creating a Window file
Example
As an example, creating a Window file for Stitch Layout Dual 2 x 1 (Top down) is explained for a projector in table front configuration.
The procedures for the other Stitch Layouts and other configurations are similar.
How to create a Window file?
1. In the OSD, navigate to Window files > Create > Mono / Active stereo [or Passive Stereo]... and press ENTER to select.
Image 7-4
The following dialog appears.
Image 7-5
2. Select Stitch Layout Dual 2 x 1 (Top down) and press Next to continue.
3. In the Sources section, click the source (or input) to be displayed on the top half of the image.
R5909056 MCM-400 HFR 11/05/2016
7. Getting started
65