Displaying Multiple Sources: Stitched Layouts - Barco MCM-400 HFR User Manual

7. Getting started
7.3

Displaying multiple sources: Stitched Layouts

Introduction
The first time you use your new MCM-400, the selected source is displayed in the device's native resolution (2x 2048 x 2160@60
Hz (Mono)). If the resolution of the source is different to the projector's resolution, the image is stretched or shrunk.
It is however possible to configure and display two or four source signals to make up one single image in full native resolution. This
is called a Stitch Layout: the sources are stitched together.
Depending on the selected Stitch Layout you can for each input select in which half or quadrant it must be displayed.
Further you can select the sync of which input (or source) must be used by the projector to display the full image.
The selected Stitch Layout type is stored in a Window File, that is an XML configuration file.
The scan direction defined in the Window file must meet the source signal scan direction.
The table below describes the different Stitch Layouts and scan directions.
Type of layout
: Single (Top down)
: Dual 1 x 2 (Top down)
: Dual 2 x 1 (Top down)
: Quad 2 x 2 (Top down)
: Quad 1 x 4 (Top down)
: 2 x single (Top down)
62
Description
The source is displayed in full screen with image being
scanned from top left to bottom right in one continuous
process.
Two inputs are required. The sources are displayed
next to each other. The images are scanned from top
left to bottom right.
Two inputs are required. The sources are displayed
on top of each other. The images are scanned from
top left to bottom right.
Four inputs are required. The sources are displayed
in four quadrants. The images in all the quadrants are
scanned from top left to bottom right.
Four inputs are required. The sources are displayed
next to each other. The images in all the quadrants
are scanned from top left to bottom right.
Two inputs are required. The sources are displayed
one above the other. The images are scanned from
top left to bottom right.
Mode
Mono / Active stereo
Mono / Active stereo
Mono / Active stereo
Mono / Active stereo
Mono / Active stereo
Passive stereo
R5909056 MCM-400 HFR 11/05/2016