Barco MCM-400 HFR User Manual page 47

To guarantee good communication, point the RCU towards the one of the infrared receivers of the MCM-400
HFR.
MCM-400
Image 6-4
IR receiver
If no button is pressed within 5 seconds after the Address button has been pressed, the RCU serial address
remains unchanged.
Each MCM-400 HFR has a common address (which by default is 0). So programming the RCU address to 0
will establish communication to any brand new MCM-400 HFR as it comes out of the box.
R5909056 MCM-400 HFR 11/05/2016
IR
ERROR
ON
STANDBY
6. Setup and configuration
43