Editing Stitch Layout - Barco MCM-400 HFR User Manual

7.3.4.2

Editing Stitch Layout

Description
You can switch the source displayed in one half or quadrant to another by simply swapping the inputs.
How to edit source layout?
1. In the OSD, navigate to Window files > Edit > Source layout... and press ENTER to select.
Image 7-14
2. In the dialog box, click the two sources that need swapping position.
Image 7-15
3. Click Apply if you want to swap the position of two other sources and go back to step 2.
4. Press OK to confirm.
R5909056 MCM-400 HFR 11/05/2016
7. Getting started
71