Rcu Control - Barco MCM-400 HFR User Manual

14. RCU CONTROL

About this chapter
It is possible to control the MCM-400 HFR through Remote Control Unit (RCU) and for that the RCU must be in the range of the IR
receivers of the MCM-400 HFR and vice versa. The commands are sent from the RCU though IR signals.
To enable communication between RCU and MCM-400 HFR, both must be set to the same IR address.
We can classify the RCU buttons in functional groups:
• buttons for OSD navigation and selection;
• buttons used for data input;
• buttons to control the device;
• buttons to adjust image settings.
Overview
• Range of RCU and IR receivers
• OSD navigation and selection
• Data input
• MCM-400 HFR control
R5909056 MCM-400 HFR 11/05/2016
14. RCU Control
193