Creating Custom Edid Files - Barco MCM-400 HFR User Manual

12.1.2 Creating Custom EDID files
Description
You can create new custom EDID files and enter the desired input timings.
Creating custom EDID files
1. In the OSD, navigate to Installation > EDID > Create... and press ENTER to select.
Image 12-4
2. In the Create Edid dialog box that appears, enter the desired data.
- Section Timings, enter the correct timings:
Active Pixels: horizontal resolution;
o
Active Lines: vertical resolution;
o
Frequency (Hz): amount of frames per second;
o
Calculation: select the correct (standard) video timings:
o
CVT: Coordinated Video Timings
o
CVT RB: Coordinated Video Timings Reduced Blanking
o
CVT MB: Coordinated Video Timings Minimum Blanking (not a standard)
o
GTF: Generalized Timing Formula
o
- Section Options, :
set or clear the check box Stereo. You can leave it unchecked.
o
select the correct interface:
o
Interface Undefined (standard)
o
Interface DVI 8 bit
o
Interface DVI 12 bit
o
Interface DisplayPort 8 bit
o
Interface DisplayPort 10 bit
o
Interface DisplayPort 12 bit
o
- Filename edit box: enter the name for the Custom EDID file.
R5909056 MCM-400 HFR 11/05/2016
12. MCM-400 HFR tools
177