Configuring The Mcm-400 Hfr For A Private Subnet - Barco MCM-400 HFR User Manual

6. Setup and configuration
6.5.1 Configuring the MCM-400 HFR for a Private Subnet
Description
To configure the MCM-400 HFR for a Private Subnet, the following steps are required:
• connect the MCM-400 HFR to the network;
• in the MCM-400 HFR, enter a fixed IP address, Subnet Mask and optionally a Gateway IP address;
• set the network configuration of any device that is connected to the same subnet to a fixed IP address within the same subnet
range.
Setting a fixed IP address in the MCM-400 HFR
1. In the OSD, navigate to Installation > Network Settings... and press ENTER to select.
Image 6-8
2. In the dialog box that appears, navigate to Use Fixed IP and press ENTER to select.
Image 6-9
The Fixed IP settings fields are enabled.
3. Enter the following parameters:
- IP address;
- Subnet Mask;
- Gateway (optional).
4. Select Apply settings.
A dialog box is displayed, showing the progress of the update.
48 R5909056 MCM-400 HFR 11/05/2016