About This Manual - Barco MCM-400 HFR User Manual

2. Introduction
2.1

About this manual

C
AUTION
C
AUTION
myBarco on top of the page. Login to the secured website and browse to your product.
Description
This manual contains all essential information for the operator to make full use of the MCM-400 HFR external warp box. It includes
the description of the warp box functionalities and capabilities, its operation, and step-by-step procedures for accessing controls.
This manual includes the following chapters:
1. Safety: safety instructions to be followed when operating the device.
2. Introduction: general information about the manual and about the device.
3. Packaging: overview of the deliverables and unpacking instructions.
4. Facility and system requirements: lists requirements and guidelines.
5. Physical installation: instructions to install the device and to make all connections.
6. Setup and configuration: setup of resolution, external communication and linking configuration.
7. Getting started: starting the device and displaying a source.
8. OSD preferences: Customizing the On Screen Display (OSD) or menu.
9. Basic operation: first level (= operator) features and image alignment
10. Advanced operation: second level (= specialist) features and alignment, such as mid-level geometry and color alignment.
11. Expert operation: third level (= expert) features and alignment, such as high end geometry, color and blending alignment.
12. Maintenance and troubleshooting: lists maintenance activities and troubleshooting tips.
13. MCM-400 HFR tools: tools to perform a wide range of actions and to customize the device for your application.
The appendix includes Specifications, detailed information about the Remote Control Unit (RCU) and On Screen Display (OSD or
menu) and environmental information.
20
:
For the latest version of the product manuals, see http://www.barco.com.
:
Always check for the latest firmware version the Barco website (http://www.barco.com) and select
R5909056 MCM-400 HFR 11/05/2016