Adjusting The Contrast - Barco MCM-400 HFR User Manual

7. Getting started
7.4.2

Adjusting the contrast

Description
It is possible to adjust the contrast (= white level) of the projected image within the range 0 to 255. Default value is 128. Changing
the contrast is change the ratio of full white compared to full black. In multiple channel systems, the contrast must be set to the
default value on all projectors.
How to adjust contrast?
1. In the OSD, navigate to Image > Settings > Contrast... and press ENTER to select.
Image 7-31
2. In the dialog box, select the source for which you want to change the contrast.
Image 7-32
3. Change the value to your wishes.
Image 7-33
4. Exit the menu.
80 R5909056 MCM-400 HFR 11/05/2016