Setting The Axis Link To On Or Off - Barco MCM-400 HFR User Manual

10.1.1 Setting the Axis link to ON or OFF

Description
Axis link can be set to On or Off. Default is Off:
• Off: the adjustment coordinate system is absolute.
• On: the adjustment coordinate system coincides with the edges of the distorted image. This setting is only used in very dedi-
cated display systems.
Example (2 x 2 mode) – Axis link set to Off
1. Start with a non-distorted image.
2. Set Axislink to Off.
3. Adjust the value of PixelsX (row 0; col 0) to +300 to move the top left corner to the right.
Y
Image 10-1
Example: Axis link set to Off
4. Now adjust the PixelsY position to +300 to move the top left corner down.
The left corner is shifted downwards along the Y-axis which is still vertical.
300,300
Image 10-2
Example: Axis link set to Off
Example (2 x 2 mode) – Axis link set to On
Following procedure illustrates a basic 2 x 2 adjustment with Axislink set On and Off.
1. Start with a non-distorted image.
2. Set Axislink to On.
3. Adjust the value of PixelsX (row 0; col 0) to +300 to move the left top corner to the right.
R5909056 MCM-400 HFR 11/05/2016
X
X
Y
10. Expert operation
111