Linked Clo - Barco MCM-400 HFR User Manual

6.8

Linked CLO

CLO setting needs to be done in the master only!
Prior to enabling linked CLO, ensure that the Slave projectors have been added to the list of Linked devices.
See procedure "Linking MCM-400 HFR devices in a multi-channel system", page 53.
How to link CLO?
1. In the OSD of the MCM-400 HFR navigate to Installation > Linked CLO... and press ENTER to select.
Image 6-20
2. In the dialog box that appears, set the 'enabled CLO' check box and fill in the target foot-lambert (fL).
Image 6-21
R5909056 MCM-400 HFR 11/05/2016
6. Setup and configuration
57