Single-Key Operation - GE DTR GEK-106305A Instruction Manual

9.5 SINGLE-KEY OPERATION.

The DTR incorporates a simplified operation mode, using only the ENT key. This mode allows to access relay
information without the need to remove the external plastic cover. The operation mode consists in pressing the ENT
key repeatedly. For accessing this mode, we need to start at the stand-by message. The available information in this
operation mode is as follows:
80
9. KEYPAD AND DISPLAY
Current Displays the Phase A current in
amperes, referred to the primary
side.
V-primary Displays the phase voltage in kV,
referred to the primary side.
Frequency Displays the actual frequency value
Displays the OLTC tap position
Tap
Indicates whether the relay is in
RELAY
service or out of service
STATUS
ACTIVE TABLE Indicates which is the active settings
table
Displays the regulator status
STOPPED
AUTOMATIC Displays the regulator status
Displays the regulator status
REMOTE
DATE/TIME Displays the relay date and time
DTR Digital Tap Changer Controller GE—106305A