Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

Table 182: Severity Level Mapping For Syslog Events
Severity Keyword
severity_fatal
severity_critical
severity_major
severity_minor
severity_warning
severity_notification
severity_normal
severity_debugging
Result String
None
Set _cerrno
No
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u"
"msg {%s}"
Event Type
event_id
event_type
event_type_string
event_pub_sec event_pub_msec
msg

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

Syslog Priority
LOG_EMERG (0)
LOG_ALERT (1)
LOG_CRIT (2)
LOG_ERR (3)
LOG_WARNING (4)
LOG_NOTICE (5)
LOG_INFO (6)
LOG_DEBUG (7)
Description
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
Type of event.
An ASCII string that represents the name of the event
for this event type.
The time, in seconds and milliseconds, when the event
was published to the EEM.
The last syslog message that matches the pattern.
event_register_syslog
Description
System is unusable.
Critical conditions, immediate
attention required.
Major conditions.
Minor conditions.
Warning conditions.
Basic notification, informational
messages.
Normal event, indicates returning
to a normal state.
Debugging messages.
1947