Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

event_register_appl
nice
If multiple conditions exist, the application event will be raised when all the conditions are satisfied.
Result String
None
Set _cerrno
No
Event_reqinfo
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u"
"sub_system 0x%x type %u data1 {%s} data2 {%s} data3 {%s} data4 {%s}"
Event Type
event_id
event_type
event_type_string
event_pub_sec event_pub_msec
sub_system
type
data1 data2 data3 data4

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1872
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0.
Description
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
Type of event.
An ASCII string that represents the name of the event
for this event type.
The time, in seconds and milliseconds, when the event
was published to the Embedded Event Manager
(EEM).
Number assigned to the EEM policy that published
the application event. Number is set to 798 because
all other numbers are reserved for Cisco use.
Event subtype within the specified component.
Argument data that is passed to the
application-specific event when the event is published.
The data is character text, an environment variable,
or a combination of the two.