Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

event_register_nf
Subevent Arguments
field
rate_interval
entry_value
entry_op
exit_value

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1912
(Mandatory) Specifies the cache or field attribute to
be monitored. One of the following attributes can be
specified:
• counter {bytes | packets}--Specifies the
counter fields.
• datalink {dot1q | mac}--Specifies the datalink
(layer2) fields.
• flow {direction | sampler}--Specifies the flow
identifying fields.
• interface {input | output}--Specifies the
interface fields.
• ipv4 field-type-- Specifies the IPv4 fields.
• ipv6 field-type-- IPv6 fields
• routing routing-attrribute -- Specifies the
routing attributes.
• timestamp sysuptime {first | last}--Specifies
the timestamp fields.
• transport field-type-- Specifies the Transport
layer fields.
(Mandatory) Specifies the rate interval value in
seconds used to calculate the rate. This field is only
valid for event1.
(Mandatory) Specifies the field or rate value.
(Mandatory) Specifies the field operator.
The comparison operator valid values are:
• eq - Equal to
• ge - Greater than or equal to
• gt - Greater than
• le - Less than or equal to
• lt - Less than
• wc - Wildcard
(Optional) The value at which the event is rearmed
to be monitored again.