Holding A Scheduled Eem Policy Event Or Event Queue - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 4
exit
Example:
Device(config)# exit

Holding a Scheduled EEM Policy Event or Event Queue

To hold a scheduled EEM policy event or event queue in the EEM scheduler, perform this task. In this task,
all pending EEM policies are displayed. A policy identified using a job ID of 2 is held in the EEM scheduler,
and the final step shows that the policy with a job ID of 2 has changed status from pending to held.
SUMMARY STEPS
1. enable
2. show event manager policy pending [queue-type{applet | call-home | axp | script} class class-options
| detailed]
3. event manager scheduler hold {all| policy job-id | queue-type {applet | call-home | axp | script} class
class-options} [processor {rp_primary| rp_standby}]
4. show event manager policy pending [queue-type{applet | call-home | axp | script} class class-options
| detailed
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
show event manager policy pending [queue-type{applet |
call-home | axp | script} class class-options | detailed]
Example:
Device# show event manager policy pending
Step 3
event manager scheduler hold {all| policy job-id | queue-type
{applet | call-home | axp | script} class class-options} [processor
{rp_primary| rp_standby}]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Write EEM Policies Using the Cisco IOS CLI
Purpose
Exits global configuration mode and returns to privileged
EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the pending EEM policies.
Holds a scheduled EEM policy event or event queue
in the EEM scheduler.
• In this example, a policy with a job ID of 2 is
put on hold.
1713