Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

event_register_syslog
queue_priority
maxrun
nice
severity_xxx
If multiple conditions are specified, the syslog event will be raised when all the conditions are matched.

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1946
(Optional) Priority level at which the script will be
queued:
• queue_priority low--Specifies that the script is
to be queued at the lowest of the three priority
levels.
• queue_priority normal--Specifies that the script
is to be queued at a priority level greater than
low priority but less than high priority.
• queue_priority high--Specifies that the script is
to be queued at the highest of the three priority
levels.
• queue_priority last--Specifies that the script is
to be queued at the lowest priority level.
If more than one script is registered with the
"queue_priority_last" argument set, these scripts will
execute in the order in which the events are published.
The queue_priority argument specifies the
Note
queuing priority, but not the execution
priority, of the script being registered.
If this argument is not specified, the default queuing
priority is normal.
(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the default
20-second run-time limit is used.
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0.
(Optional) The event severity to be screened. If this
argument is specified, only messages that are at the
specified severity level are screened. See the table
titled "Severity Level Mapping For Syslog Events"
for the severity level mapping for syslog events.