Disabling Aaa Authorization - Cisco Catalyst 2960 series Configuration Manual

How to Write EEM Policies Using the Cisco IOS CLI
Command or Action
Step 5
exit
Example:
Device(config)# exit

Disabling AAA Authorization

Perform this task to allow EEM policies to bypass AAA authorization when triggered.
SUMMARY STEPS
1. enable
2. configure terminal
3. event manager applet
4. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
event manager applet
bypass] [class class-options] [trap]
Example:
Device(config)# event manager applet one class
A authorization bypass
Step 4 exit
Example:
Device(config-aaplet)# exit
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1742
Purpose
Exits global configuration mode and returns to privileged EXEC mode.
applet-name [authorization bypass] [class class-options] [trap]
applet-name [authorization
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Registers the applet with the Embedded Event Manager
(EEM) and enters applet configuration mode.
Exits device configuration applet mode and returns to
privileged EXEC mode.