Chapter 1: Getting Started; Starting The Web-Based Configuration Utility - Cisco SX350 Series Administration Manual

Getting Started

Starting the Web-based Configuration Utility

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
This section provides an introduction to the web-based configuration utility, and covers the
following topics:
• Starting the Web-based Configuration Utility
• Out-Of-Band Port
• USB Port
• Basic or Advanced Display Mode
• Quick Start Device Configuration
• Interface Naming Conventions
• Window Navigation
• Search Facility
This section describes how to navigate the web-based switch configuration utility.
If you are using a pop-up blocker, make sure it is disabled.
Browser Restrictions
If you are using IPv6 interfaces on your management station, use the IPv6 global address and
not the IPv6 link local address to access the device from your browser.
1
8