Event_Register_Oir - Cisco Catalyst 2960 series Configuration Manual

event_register_oir

Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u
event_severity %u arg %u"
Event Type
event_id
event_type
event_type_string
event_pub_sec event_pub_msec
event_severity
argc
arg1
arg2
arg3
arg4
arg6
arg7
arg8
arg9
arg10
arg11
arg12
arg13
arg14
arg15
event_register_oir
Registers for an online insertion and removal (OIR) event. Use this Tcl command extension to run a policy
on the basis of an event raised when a hardware card OIR occurs. These events are handled by the OIR event
detector that screens for this event.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1916
Description
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
Type of event.
An ASCII string that represents the name of the event
for this event type.
The time, in seconds and milliseconds, when the event
was published to the EEM.
The severity of the event.
The parameters that are passed from the XML SOAP
command to the script.